Australia standard spray booth

Australia standard spray booth

PRODUCT DETAILS

Item

Detailed Specification

Inside dimension

8000×3900×2650 mm (L×W×H)

Outside dimension

8650×4000×3400 mm (L×W×H)

Front door

Folding door, 3 folds, 3000×2900 mm (W×H), without frame, tempered   glass window with aluminium frame, colour: white, with handle on both sides,   one door with pressure lock.

Emergency door

1 unit, 800×2000mm (W×H), colour: white, on the right   side, tempered glass window with aluminium frame, with handle on both sides.

Basement

Galvanized steel assemble, 300mm high, quadrate steel support, full grilles   made by flat and twisted steel, galvanized, inner ramps, no   need to open ventilation hole on the base.

Wall panel

Thickness: 50mm, width: 1150mm, tongue   and groove structure, 0.6mm colour steel with EPS insulation inside,   colour: white.   With moveable hanger inside the booth.

Light

Ceiling   Lights: 10Units×4Pcs=40Pcs×36W, 45 degree, side light: 10Units×4Pcs=40Pcs×36W,   with electronic ballasts, lighting open from outside and inside, tempered   glass.

Generator cabinet

Intake from top, intake   unit on the roof of factory, no steel platform, exhaust from rear   side, quadrate steel frame; machine-made panel covered (powered and painted), filled   with heat preservation material in the middle.

Intake and Exhaust system

Inlet: 1×7.5KW centrifugal fan, belt drive, model:   TAE-450H, air capacity: 21000m3/h,   no soft   start, normal start, with mushroom, with 2m ducts.

Outlet: 1×2.2KW anti-explosion axial fan, air   capacity: 15000m3/h,   no soft   start, normal start, with base 550×4000×300mm, with hood, with 5m ducts   totally, with reducer to 800×800mm.

Heating system

G20 diesel burner, stainless steel heat exchanger, pneumatic damper   actuates from spraying to baking cycle. Max. heating productivity: 200000kcal/h,   maximum temperature: 80 degree, stainless steel chimney 2m, 300   litre tank.

Purification system

Pre-filter,   ceiling filter, fibreglass filter.

Roof

EPS panel

Control system

Spraying, heat spraying, baking, time setting, lighting switch,   thermostat, failure indicator, power supply switch, emergency stop, hour   meter, temperature limit controller, pressure gauge, with extra wire, no   yellow color, temperature control use Omron.

Total power

13KW (power supply 3*415V, 50HZ)

Note

PVC duct 50mm x 50mm, 24m, with your logo, more self tap screw, less rivet.

spray booth drawing