Case

Panel beating painting line

Date: 2022-05-28

IMG-20151216-WA0008


Item

Detailed Specification

Inside dimension

6900×3900×2850   mm (L×W×H)

Outside dimension

8100×4000×3550 mm   (L×W×H)

Basement

Galvanized   steel assemble, in the ground, 300mm   high, full grilles, made by flat bar and twisted steel, then galvanized, square   steel support, galvanized, 2 ramps (for another project), 750*2000mm/pcs, no   rail and small trolley on the basement (make by customer).

Front door

Folding door, 3-folds,   3000×2600mm(W×H), no frame, tempered glass with aluminum alloy frame, puller   on both sides, with pressure lock. EPS inside, color: red, 3 sets big hinges.

Emergency door

1 unit, 800×2000 mm (WXH), tempered glass with aluminum alloy frame, color: white

Room body

Wall panel   thickness:50mm, width:1150mm,   tongue and groove structure, 0.6mm color steel with polystyrene(EPS) insulation   inside, color: white.

Light system

Ceiling Lights:   8Units×4Pcs=32Pcs×36W, without side lights, lighting box powder   coated, with electronic ballasts.

Generator cabinet

Intake air from back upper direction, exhaust air from back upper   direction, galvanized steel frame, outside is white coated steel, powdered   and coated, filled with heat preservation material in the middle, color:   white

Intake and exhaust

System

Inlet: 1×5.5KW turbo fan, direct drive, air   capacity: 18000m3/h/fan. With 4m ducts

Outlet: 1×5.5KW turbo fan, direct drive, air   capacity: 18000m3/h/fan. With 4m ducts

Heating system

Riello FS20 gas burner, stainless heat exchanger, pneumatic damper for   spraying and baking cycle, heat productive 200000Kcal/h totally, Max temp: 80℃.

Purification system

Pre-filter,   high efficiency filter (ceiling filter), fiberglass filter, activated carbon   filter

Roof

50mm EPS panel with 0.6mm steel.

Control system

Spraying, heating   spraying, baking, baking time, lighting switch, failure indicator, thermostat , power supply switch,   emergency stop, time meter, temperature limiter, pressure gauge.

Total power

12.5KW (3x220V, 60HZ)

 


Note 1

Plan 1: 6 booths, and 2 booths (the 2th and 5th) with water base paint   system. Plan 2: 2 booths, the right one with water base paint system, one row   in the middle, 2 rows on each side.

Note 2tsd

With electric roller shutter door 6.2mx2.6m, total 9 sets, as the   drawing showed.

1653743718c18a7c